All guides

Solar Energy Storage: How Solar Batteries Work in a California Home (2026)

A home battery stores the solar power your house doesn't use at midday and gives it back in the evening or during an outage. Under NEM 3.0 that shift, not exporting, is where most of the savings come from.

By Taylor Crouse — Founder, Helios Energy GlobalPublished

Quick answer

  • Solar energy storage is a home battery that saves the solar power your house doesn't use right away, so you can use it in the evening, overnight or during an outage.
  • Panels make DC power, the battery stores it, and an inverter turns it back into the AC your home runs on. A backup gateway or switch separates the house from the grid in an outage so the battery can keep your circuits running.
  • The three batteries Helios installs all use lithium iron phosphate (LFP) cells: Tesla Powerwall 3 (13.5 kWh, 11.5 kW), Enphase IQ Battery 10C (10 kWh, 7.08 kW) and FranklinWH aPower 2 (15 kWh, 10 kW).
  • Under NEM 3.0 (SCE, SDG&E and PG&E), midday exports earn roughly 3–9¢/kWh while SCE's 4–9 PM peak runs about 48–58¢/kWh. Storing solar for the evening is where a battery pays. LADWP and the other municipal utilities still credit exports close to retail.
Solar Energy Storage: How Solar Batteries Work in a California Home (2026)

Solar panels only produce while the sun is up, and most households use the bulk of their electricity after it goes down. Storage closes that gap. The U.S. Department of Energy describes it simply: storage captures electricity, holds it as chemical energy in the battery, and releases it later, so surplus daytime solar can be used after sunset. This guide explains how that works in a Southern California home, what the numbers on a battery spec sheet mean, the main types of solar batteries, and when storage is worth it here.

Last verified: November 14, 2026 by Helios Energy Global.


How solar energy storage works, step by step

1. Daytime: the panels charge the battery. Your panels produce direct current (DC). The house uses what it needs first. Instead of sending the surplus to the grid, the system sends it into the battery, and on a sunny day a system sized for storage can fill it well before sunset.

2. Evening: the battery runs the house. When production drops, or when the 4–9 PM peak starts, the battery discharges. Its inverter converts the stored DC into 120/240-volt alternating current (AC) for your outlets and appliances. A battery set up for bill savings is usually programmed to cover that peak window first.

3. Outage: the gateway islands the home. Grid-tied solar is required to shut off when the grid goes down, so it can't push power onto lines a utility crew is working on. A backup gateway or switch (Tesla's Backup Switch or Gateway, Enphase's IQ System Controller, FranklinWH's aGate) disconnects the home from the grid first. The panels and battery can then keep your backed-up circuits running. Without that hardware, panels stay off in an outage, which is why solar alone doesn't keep the lights on in a power outage.

4. Overnight: the grid fills in. When the battery reaches the reserve you set aside for outages, the house draws from the grid again until the panels start producing in the morning. Our Powerwall reserve setting guide covers how to pick that number.

Energy vs. power: the two numbers on every spec sheet

Every home battery has two headline specs, and they answer different questions.

  • Energy, in kilowatt-hours (kWh): how much the battery holds. A 13.5 kWh Powerwall 3 could run a steady 1 kW load for about 13 hours. If kWh are new to you, start with what a kilowatt-hour is.
  • Power, in kilowatts (kW): how much it can deliver at once. Power decides whether the battery can run a central air conditioner, a well pump or an electric range at the same time as everything else. Our watts-to-run-a-house guide lists typical loads.
Battery Usable energy Continuous power Cell chemistry How it connects
Tesla Powerwall 3 13.5 kWh 11.5 kW LFP Built-in solar inverter; pairs directly with new panels
Enphase IQ Battery 10C 10 kWh 7.08 kW (10.5 kW peak) LFP AC-coupled, with microinverters built in
FranklinWH aPower 2 15 kWh 10 kW LFP AC-coupled through the aGate, with a generator port

Specs are from each manufacturer's datasheet or product page. Batteries can be stacked: two Powerwall 3 units hold 27 kWh, and Powerwall 3 Expansion units add 13.5 kWh each.

Types of solar batteries

By chemistry. Most new home batteries use lithium iron phosphate (LFP), including all three above. LFP is more tolerant of heat and of daily cycling than the nickel manganese cobalt (NMC) cells used in some earlier models such as the Powerwall 2. Lead-acid batteries still turn up in off-grid cabins, but they are bulkier, last fewer cycles and are rarely used in new grid-tied homes. How chemistry affects lifespan is covered in how long solar batteries last.

By how they connect. A DC-coupled battery shares an inverter with the panels, which is efficient on a new install. An AC-coupled battery has its own inverter and connects on the AC side, which is the usual way to add a battery to an existing solar system, including one another company installed.

By how much of the house they back up. A partial-backup setup keeps critical circuits running: fridge, lights, internet, a few outlets. A whole-home setup backs up the full panel and usually needs more capacity and power. The trade-offs are in whole-home vs. partial backup, and sizing for the full house is covered on our whole home battery backup page.

Why storage matters more in California under NEM 3.0

SCE, SDG&E and PG&E customers who applied for interconnection after April 2023 are on the CPUC's Net Billing Tariff, usually called NEM 3.0. Exported solar is credited at roughly 3–9¢/kWh at midday. Buying power back during SCE's 4–9 PM peak costs about 48–58¢/kWh. A kilowatt-hour stored at noon and used at 6 PM is worth several times what it earns exported, which is why a battery is usually what makes a new SCE or SDG&E system pencil out. The full rules are in our NEM 3.0 explainer, and solar vs. solar plus battery under NEM 3.0 runs the comparison.

LADWP and the other municipal utilities (Pasadena, Glendale, Burbank, Anaheim, Riverside) are not on NEM 3.0 and still credit exports close to retail. There, a battery is mostly about backup during outages and Public Safety Power Shutoffs, not bill savings.

Storage can also earn money directly. Powerwall owners enrolled in Tesla's virtual power plant can be paid for sending power to the grid during summer events. The program terms and the 2027 outlook are in our Tesla virtual power plant guide.

How much storage a home needs

It depends on the job you want the battery to do:

  • Bill savings under NEM 3.0: size the battery to cover what the house uses from 4 to 9 PM. For many homes one battery does it.
  • Backup: size to the circuits you want running and for how long. Air conditioning and well pumps change the answer more than anything else.

Our battery sizing guide walks through both, and how long a Powerwall lasts in an outage has runtime examples. You can also check your own backup length by picking the loads you want covered.

What home batteries run in 2026

Installed prices from Helios's current price sheet, before incentives:

  • Tesla Powerwall 3: about $14,500–$18,500 for one unit. See Powerwall 3 cost for the full breakdown.
  • Enphase IQ Battery 10C: about $13,000–$15,500. See the Enphase IQ Battery page.
  • FranklinWH aPower 2: about $16,000–$21,000 with the aGate. See the FranklinWH page.

The federal residential tax credit ended December 31, 2025, but battery rebates still exist in parts of Southern California. The full list, with who qualifies, is in California solar incentives and rebates, and solar battery cost breaks down what drives the price.

FAQ

How do solar batteries work?

A solar battery stores the DC electricity your panels produce during the day in lithium cells, then releases it through an inverter as AC power when the panels aren't producing enough: in the evening, overnight, or during an outage if the system has backup hardware.

What are the main types of solar batteries?

By chemistry, most new home batteries are lithium iron phosphate (LFP); some older models use NMC, and lead-acid is mostly used off-grid. By connection, batteries are DC-coupled (sharing the solar inverter) or AC-coupled (with their own inverter). The three batteries Helios installs, Tesla Powerwall 3, Enphase IQ Battery 10C and FranklinWH aPower 2, are all LFP.

Can solar power my house at night?

Not directly. Panels don't produce at night, so a home without a battery runs on the grid after sunset. With a battery, the house uses solar stored during the day until the battery reaches its reserve. Cloudy days and winter output are covered in do solar panels work on cloudy days.

Does a solar battery work during a power outage?

Yes, if it's installed with backup hardware that disconnects the home from the grid. The battery then powers your backed-up circuits, and the panels can recharge it during the day, which matters in multi-day Public Safety Power Shutoffs.

Is solar energy storage worth it in California?

For most SCE, SDG&E and PG&E customers on NEM 3.0, yes, because stored solar replaces peak-priced grid power that costs several times what exports earn. For LADWP and other municipal utility customers, who still get near-retail export credits, the case rests mostly on backup. Your own numbers depend on your rate plan and usage; the solar panel calculator runs them.

Can I add a battery to the solar I already have?

Usually, yes. An AC-coupled battery connects alongside an existing system, including one installed by a company that has since closed. A properly filed battery addition keeps a NEM 1.0 or 2.0 customer's legacy status; adding more solar than the tariff's allowance is what can change it. The details are in our guide to adding a battery to existing solar.


Next steps

Get a free consultation and custom design.

No pressure, no obligation — the owner reviews every design we send.